GasMix

Download Brochure

• ZEPHYR
• GasMix™ AIOLOS II
• ​HURRICANE
• ​GMRACK
• ​ATMO
• ​AURA
• ​LiqMix​
• ​LIQMIX Cascade

<

>

Compact diluter with a smart software

On-site customized gas standard preparation has never been easier than with the Zephyr – a compact version of GasMix™.
Due to its small size and embedded software, the Zephyr can be installed where you need it. With 5″ touch screen and intuitive interface the diluter is very simple in operation and widely used for various applications that involve only 2 gases. For example, the Zephyr is very cost efficient solution for creating multipont calibration gases from a concentrated gas standard and a diluent.
Benefits of the GasMix™ Zephyr :

• Compatible with aggressive gases and active compounds like trace sulfur, ammonia, VOC
• Small footprint, transportable
• Can run up to 8 hours on internal battery (option)
• Built-in software, no need for a PC
• Intuitive interface, ease of use
• Smart Sequence builder feature helps creation of multi-point curves in one click
• Memory for 10 multi-segments dilution sequences
• MFC calibration curves for each used gas
• Fully compliant with ISO6145-7
• Can communicate with an analyzer via dry contact or TTL

The intelligent gas mixer, diluter & injector

To save money and gain in flexibility, many laboratories use Aiolos – dynamic gas mixer from AlyTech – to perform multi-point calibration,linearity checks, LOQ/LOD validation.
The Aiolos II is the last generation of this popular GasMix™ product produced by AlyTech since over 10 years. By mixing and / or diluting two to four gases the system generates calibration gas on site at the desired concentration, even to very low levels. The accuracy and reproducibility of the prepared gas standards make it an accomplished tool, well-accepted by users concerned with metrological performances.
Using GasMix ™ Aiolos II you benefit of :

• Dedicated, user-friendly and intuitive software
• Less time consuming: programmed injection sequences is a great time-saver for routine quality procedures
• Full automation: by synchronizing dilutions, injection, flushing timings with an external analyzer
• Improved accuracy: multipoint MFC calibration curves for each used gas
• Rigorous metrology : full traceability, documentation, certification of the concentration accuracy
• Compliance with ISO 6145-7

Versatile tool to make really complex gas mixtures Diluting – Blending up to 16 gases simultaneously !

The most powerful in GasMix™ family, this gas mixer/diluter can automatically prepare and deliver complex gases to virtually all kinds of analytical instruments, reactors, or sensors.
Key benefits :

• Unique on the market
• Fully automated mixing system up to 16 gases simultaneously
• Operation with versatile GasMix™ PC software
• Ease to use even for very complex mixtures
• Complies to ISO 6145-7
• Calibration curves for each used gas
• Evolutionary system with possibility to add gas channels, calibrations, various options available

Enhanced functionalities of GasMix™… in a 19″ rack

The GMRack is the industrial version of the most popular laboratory gas mixer/diluter Aiolos II.
Designed and manufactured by Alytech, this version of GasMix addresses to the applications outside of the laboratory .
Compatible with the standard 19' rack mount, this system accommodates up to 4 gas channels to make calibration gas mixtures directly at the production site or within the analyzer tower.
Using GasMix ™ GMRACK you benefit of :

• 19″ rack mounted industrial version of GasMix™
• On-board computer and a touch screen for easier control on site
• Up to 4 gas channels
• Can be remotely driven by Ethernet communication
• USB port on front panel to upload projects
• Compliance with ISO 6145-7

Calibrate 3 analyzers in a row automatically !

Model ATMO calibration gas generator dedicated to the air monitoring agencies.
Developed in collaboration with French air monitoring agencies, GasMix™ ATMO can calibrate 3 analyzers in a row
automatically.
Compliant to EN standards: Repeatability and linearity tests of SO2, NO-NOX and CO analyzers are simplified and automated.
Standard EN 14181″ Stationary source emissions – Quality assurance of automated measuring systems” requires a linearity calibration, over at least 6 additional points equally divided across the measuring range. When it comes to 6 point calibration, GasMix helps to operator save a time and cost during these routine controls while assuring high accuracy of the calibration.
Using GasMix ™ Aiolos II you benefit of :

• Economical and application driven design
• Compliant to ISO 6145-7 standard
• Couples of ON/OFF valves and 3-way valves
• Equipped with 2 Mass Flow Controllers (MFC)
• MFC factory calibrated to all gas matrix
• Handle 3span gases and dilution Air-zero gas
• Dilution ratio : up to 1/10000

LPG VAPORIZER
Simple, safe & cost-saving

Everyone analyzing LPG (Liquefied Petroleum Gas) or LNG (Liquefied Natural Gas) samples knows challenges created by these products.
The solution offered by AlyTech is significantly increase productivity, safety and improve your quality assurance while running GPL samples.To help analysts AlyTech engineers designed AURA – LPG/LNG evaporating device equipped with a heat regulator to set optimal evaporation temperature and heated transfer lines to prevent any condensation. AURA safely vaporizes the LPG sample into 100% gas phase and build-in pressure regulator keeps the output pressure at a desired value.
The typical application of AURA is in combination with automated gas blender/diluter GasMix™ from AlyTech to prepare calibration standards in LPG matrix. There are many other applications where the AURA helps safely measure LPG samples without sample pressurization, for example injection in GC or GC/MS.
When working with LPG/LNG samples the AlyTech AURA is the ideal tool for calibration of a total Sulfur and Nitrogen analyzers. The analyzer such as the MultitekTM from PAC on the picture is connected to the GasMixTM AIOLOS in combination with AURA vaporizer. Sulfur and nitrogen can therefore be measured without the need of sample pressurization, providing a maximum operator safety.
This LPG module AURA makes GasMix™ a Unique and Universal Gas & LPG Sampler and Injector.
It will allow you to significantly reduce the number of calibration gas cylinders to store!
The AURA heats and vaporizes the LPG containing the sulfur and/or nitrogen compounds at known concentration into the GasMixTM, which will dilute it with another gas, such as argon. The solution enables calibration of your analyzer and checks the linearity of response without really limitation on the number of points. Equipped with an injection valve and flexible software, the system can interface with the analyzer and run fully automatic multipoint test sequences of routine quality assurance program.
Buying multiple LPG standards is no more necessary, you prepare that you need on-site with only one LPG standard, saving time and money. Use a LPG standard avoids matrix effects (that may occur if an analyzer is calibrated with gases while samples being LPG), giving more accurate results.
BENEFITS :

• Compact device, simple and ease of use
• No need for sample pressurization
• Maximum operator safety
• Heated transfer line assures 100% gas phase
• In combination with GasMix™ diluter on-site preparation of low level concentration calibration gas using only 1 LPG certified standard
• Compliant to ASTM D6667 and D7551
• Designed to handle aggressive gases

Generate your gas standard from a liquid

Some analytical fields need gas standards which are not easily commercially available in gas cylinders.
AlyTech has developed LiqMix specifically for those applications when you need to produce a standard gas from a liquid or liquid mixture.
The system vaporizes in precisely controlled manner a liquid into a gas stream generating a gas standard at multiple concentrations with good accuracy, high repeatability and full traceability.
Your benefits using LiqMix :

• Creating gas phase standards from a gas, liquid or liquid cocktail mixture
• Wide range of concentrations from % down to ppm
• Dedicated LiqMix software does all calculations and devices control
• Robust design, simple in use, fully automated operation
• Heated lines prevent condensation and maintain the vapors in gas phase

Generate your gas standard from a liquid down to ppb levels

The LiqMix Cascade is a laboratory instrument designed for automatic generation of customized calibration gas mixtures by controlled evaporation of a liquid and future dynamic dilution/mixing with one or several gases. The system can generate a standard gas at different oncentrations down to trace levels in a programmed sequence with high precision, accurate and with full traceability.
Intelligent multi-stage cascade dilution offers very wide range of concentrations from % to ppb levels.
BENEFITS of LiqMix Cascade :

• Creating gas phase standards from a gas, liquid or liquid cocktail mixture
• Wide range of concentrations from % down to ppb generated on-site
• Complies to ISO 6145-7
• LiqMix software does all calculations and devices control even for very complex mixtures
• Build, save, run complex automated sequences of mixing/diluting
• Robust design, simple in use, fully automated operation
• Full automation of the process provides real time-saving for the operator
• Heated lines prevent condensation and maintain the vapors in gas phase till the delivery
• Can communicate with an analyzer via dry contact or TTL​